Year One Module Assignment: 18101- Occupational Overview- The Sprinkler Industry Name First Last 1. Which of the following is true regarding codes and standards?(Required) a) A code specifies what must be done, while a standard describes how it should be done. b) Codes and standards gain legal status in all states as soon as they are published. c) The decision as to which codes and standards apply is made by the sprinkler fitter. d) The only code that applies to sprinkler fitting is the fire code. 2. The standard that sets the minimum requirements for installing private fire service mains and theirequipment is _____.(Required) a) NFPA 13D b) NFPA 13R c) NFPA 20 d) NFPA 24 3. The most common type of sprinkler system is the _____.(Required) a) wet pipe sprinkler system b) dry pipe sprinkler system c) preaction sprinkler system d) deluge sprinkler system 4. The standard that covers the design and installation of sprinkler systems in one- and two-familydwellings and manufactured homes is _____.(Required) a) NFPA 13D b) NFPA 13R c) NFPA 20 d) NFPA 24 5. The key advantage of a deluge sprinkler system is _____.(Required) a) it can be used anywhere b) it is designed for below-freezing applications c) high volume and fast reaction d) it is much cheaper to install and maintain 6. The standard that covers the selection and installation of stationary pumps supplying liquid for private fire protection is _____.(Required) a) NFPA 13D b) NFPA 13R c) NFPA 20 d) NFPA 24 7. The standard that covers the design and installation of sprinkler systems in low-rise residential occupancies is _____.(Required) a) NFPA 13D b) NFPA 13R c) NFPA 20 d) NFPA 24 8. The wrench most useful in removing or installing polished or plated devices such as valves is _____.(Required) a) a pipe wrench b) a chain wrench c) a strap wrench d) curved jaw pliers 9. OSHA standards for the construction industry are covered in _____.(Required) a) 29 CFR, Part 1910 b) 29 CFR, Part 1926 c) 29 CFR, Part 1965 d) 29 CFR, Part 1970 10. The sprinkler systems you would most likely consider for a below-freezing environment are _____.(Required) a) wet pipe and dry pipe sprinkler systems b) dry pipe and preaction sprinkler systems c) wet pipe and preaction sprinkler systems d) dry pipe and deluge sprinkler systems CommentsThis field is for validation purposes and should be left unchanged.